The Heat is On: Furnace Efficiency and Maintenance
(October 08, 2019
)
You can almost hear the hum of furnaces in homes throughout North America cranking up for the colder months ahead. It is especially important to have furnaces inspected and properly maintained to ensure that they run efficiently and safely. Here are some pointers to get the most out of a furnace:


SIMPLE WAYS TO IMPROVE EFFICIENCY
Home heating, especially with a gas furnace and your location, can represent half or more of a typical home’s winter utility bill. Efficient operation can mean lower energy bills and a more comfortable home. Programmable thermostats can be used to automatically turn heat up or down at specified times, so that the temperature is lowered overnight or while no one is at home. The newest types of thermostats can be operated via smartphone or tablet and can even "learn" the preferred temperature for different times of day. Now that’s a "Hot Trend".
Thermostats should be calibrated occasionally to avoid "off-cycle" heat loss. A properly calibrated thermostat will result in more even heating between the on/off cycles, which is more efficient and more comfortable.
SAFETY AND MAINTENANCE
Safety is also an important factor in furnace operation. Gas furnaces can be a source of dangerous carbon monoxide if there are leaks or cracks that go unnoticed or unrepaired. The furnace flame should be steady and burn blue; if not, this should be addressed immediately. A qualified contractor or inspector can detect these types of problems and recommend needed action.
Simple furnace maintenance includes checking and replacing disposable air filters and cleaning permanent-type filters, as well as keeping dust, hair, and lint away from the burner compartment and air intake. No matter what type it is, a well-maintained furnace will not only last longer, but can save energy, money, and help a home’s overall air quality and comfort.
CONSIDERING A NEW FURNACE?
If a new furnace is necessary, it’s worth it to evaluate the various types of furnaces available and how well they might meet a home’s specific situation. Furnaces are defined as conventional efficiency, mid efficiency, and high efficiency. There are advantages and drawbacks to each type, and some are better suited to older homes, for example. Cost may be a factor in considering various types of systems. However, the ability of most new furnaces to reduce off-cycle heat loss, eliminate the need for an always-on pilot light, etc., make replacing a furnace worth considering if the current system is in bad repair or functioning poorly.
GUEST BLOG PROVIDED BY:
403-343-9406
Categories

- All Entries (146)
- Market Updates (7)
- Open Houses (4)
- Trends (1)
- Buying (0)
- Selling (1)
- Misc (11)
- Events (5)
- Neighbourhoods (2)
- Acreage Living (1)
- Timberlands North (1)
Archives
- January 2021 (1)
- August 2020 (1)
- April 2020 (1)
- March 2020 (2)
- January 2020 (3)
- December 2019 (2)
- November 2019 (1)
- October 2019 (4)
- September 2019 (3)
- August 2019 (4)
- July 2019 (1)
- June 2019 (3)
- May 2019 (6)
- April 2019 (6)
- March 2019 (7)
- February 2019 (3)
- January 2019 (6)
- December 2018 (6)
- November 2018 (2)
- October 2018 (1)
- September 2018 (3)
- August 2018 (5)
- July 2018 (2)
- June 2018 (5)
- May 2018 (5)
- April 2018 (5)
- March 2018 (4)
- February 2018 (5)
- January 2018 (3)
- November 2017 (1)
- October 2017 (5)
- September 2017 (6)
- August 2017 (7)
- July 2017 (9)
- June 2017 (8)
- May 2017 (6)
- April 2017 (2)
- November 2016 (1)
- October 2016 (1)